Print Page | Close Window

Gang Mask - SOP Most Density Solder Mask

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2193
Printed Date: 19 Nov 2024 at 2:23am


Topic: Gang Mask - SOP Most Density Solder Mask
Posted By: jmeinert
Subject: Gang Mask - SOP Most Density Solder Mask
Date Posted: 20 Jul 2017 at 11:39am
When I create a SOP package at Most density the solder mask is larger than I what my setting is. 

My solder mask X & Y is +- 0.05
padstack created is r135_48m145_65
should be r135_48m145_58.

Please help understand what is going on.

Jeff


Replies:
Posted By: Tom H
Date Posted: 20 Jul 2017 at 11:44am
Can you send me the FPX file so I can review?

I need to check if the program is expanding the mask to Gang it.

If the Nominal Density Level it may not Gang the mask because it does not violate the Minimum Solder Mask Web rule. But Most Density the Pad Size is larger and the solder mask might swell to Gang it together.


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window