Print Page | Close Window

LE2015_16_PRO and PADS VX1.1 Problem

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1754
Printed Date: 18 Nov 2024 at 6:46pm


Topic: LE2015_16_PRO and PADS VX1.1 Problem
Posted By: layouter88
Subject: LE2015_16_PRO and PADS VX1.1 Problem
Date Posted: 04 Sep 2015 at 7:54am
Hello
I just installed  version 16 of the LE  (had Version 14 in use before without Problems)
 
I try to build a part and always get the message
 
Unable to connect to the running PADS application
A) Confirm that PADS Power PCB is running and at Board (PCB) Level
B) Try running PADS Power PCB as "Run As Administrator' via a shortcut on the Desktop.
 
whatever I am doing, it does not work.
Instead there are two Files generated  in my libraries target folder
decalname.d    and
part type name.p  
 
is there a change in the bahaviour beetween v14 and v16 and I have to Change a Setting manually?
Best regards
Erwin
 


Replies:
Posted By: layouter88
Date Posted: 04 Sep 2015 at 8:03am
Solved
 
 
after running Mentor release switch  everything works fine again.
 
Best regards
Erwin


Print Page | Close Window