Under-body outward L-lead courtyard calculation

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello, 

Yesterday I was approaced by one of our designers who has an issue with a new aluminium capacitor we added to the Altium component database. He wanted to use the new capacitor as a replacement for another that was added to the DB a few years ago. He expected them to be interchangable because they have same dimensions, but he encountered an issue with clearance between components. 
As it turns out, the new capacitor has bigger courtyard and the reason for this is different courtyard calculation setting in the newever versions of FP Expert. From what I can see, the 2026 and 2025 version both have it under  "Under-body Outward L Lead" settings. If the component height is greater than 10mm, the nominal density courtyard expansion is 0.4mm. If it's below 10mm, the standard 0.2mm is used.  

I was wondering what was the motivation for this change and when did it happen? I tried search the forum for this topic but couldn't find anything about it. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
felecro Members Profile Send Private Message Find Members Posts Add to Buddy List Active User Joined: 08 Nov 2022 Status: Offline Points: 23	Post Options Post Reply Quote felecro Report Post Thanks(0) Quote Reply Topic: Under-body outward L-lead courtyard calculation Posted: 8 hours 10 minutes ago at 11:19pm
	Hello, Yesterday I was approaced by one of our designers who has an issue with a new aluminium capacitor we added to the Altium component database. He wanted to use the new capacitor as a replacement for another that was added to the DB a few years ago. He expected them to be interchangable because they have same dimensions, but he encountered an issue with clearance between components. As it turns out, the new capacitor has bigger courtyard and the reason for this is different courtyard calculation setting in the newever versions of FP Expert. From what I can see, the 2026 and 2025 version both have it under "Under-body Outward L Lead" settings. If the component height is greater than 10mm, the nominal density courtyard expansion is 0.4mm. If it's below 10mm, the standard 0.2mm is used. I was wondering what was the motivation for this change and when did it happen? I tried search the forum for this topic but couldn't find anything about it.