IEC 61188-7 Zero Component Orientations

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   IEC 61188-7 International Standard for Zero Component Orientation. 
The zero orientation with pin 1 in the upper left corner was published in the IPC-7351A in 2007 and is referred to as “Level A”.

The zero orientation with pin 1 in the lower left corner was published in IEC 61188-7 in 2009 and is referred to as “Level B”.

Note: Level B is recommended as standard for new ECAD libraries for 3 reasons. 

1. For 18 years the original IPC-SM-782 used Level B. 

2. The footprint should be long in the horizontal due to computer screen shapes and ANSI and IEC paper sizes. 

3. PCB layouts are long in the horizontal to fit properly on the standard paper sizes.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5716	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Topic: IEC 61188-7 Zero Component Orientations Posted: 07 Apr 2024 at 3:19pm
	IEC 61188-7 International Standard for Zero Component Orientation. The zero orientation with pin 1 in the upper left corner was published in the IPC-7351A in 2007 and is referred to as “Level A”. The zero orientation with pin 1 in the lower left corner was published in IEC 61188-7 in 2009 and is referred to as “Level B”. Note: Level B is recommended as standard for new ECAD libraries for 3 reasons. 1. For 18 years the original IPC-SM-782 used Level B. 2. The footprint should be long in the horizontal due to computer screen shapes and ANSI and IEC paper sizes. 3. PCB layouts are long in the horizontal to fit properly on the standard paper sizes.
	Stay connected - follow us! X - LinkedIn